Nead a code for my radio

Ronin
Posts: 1
Joined: Tue May 14, 2019 7:57 am

Re: Nead a code for my radio

Post by Ronin »

I have a 2002 fiesta and I need a code for M183621
redrooster
Posts: 15575
Joined: Wed Jun 25, 2014 10:14 am

Re: Nead a code for my radio

Post by redrooster »

Ronin wrote:I have a 2002 fiesta and I need a code for M183621
4906
redrooster
Posts: 15575
Joined: Wed Jun 25, 2014 10:14 am

Re: Nead a code for my radio

Post by redrooster »

Dbspeedster wrote:Hi, just resprayed my cmax and disconnected the battery, now cant find the code anymore.

Denso sat nav

Serial number is m008422

If anyone could help that would be great

Thanks
Dave
8303
Dbspeedster
Posts: 3
Joined: Mon May 13, 2019 10:49 pm

Re: Nead a code for my radio

Post by Dbspeedster »

Thanks for the code, however unit is now flashing from screen to screen. Not giving me opportunity to enter the code. Is there anything i can do or is it a ford job

Thanks
redrooster
Posts: 15575
Joined: Wed Jun 25, 2014 10:14 am

Re: Nead a code for my radio

Post by redrooster »

Dbspeedster wrote:Thanks for the code, however unit is now flashing from screen to screen. Not giving me opportunity to enter the code. Is there anything i can do or is it a ford job

Thanks
if you have already entered wrong codes previously then try leaving it switched on...without interruption ...for an hour or longer to see if the display resets
Dbspeedster
Posts: 3
Joined: Mon May 13, 2019 10:49 pm

Re: Nead a code for my radio

Post by Dbspeedster »

Thanks, that did work. However it still flashing between screen then after about 10 mins radio comes on. Blue tooth doesnt work and just mutes when i select phone.
redrooster
Posts: 15575
Joined: Wed Jun 25, 2014 10:14 am

Re: Nead a code for my radio

Post by redrooster »

Dbspeedster wrote:Thanks, that did work. However it still flashing between screen then after about 10 mins radio comes on. Blue tooth doesnt work and just mutes when i select phone.
Try disconnecting it from the battery supply ( remove the fuse for example) for 30 minutes.

Then reconnect and enter the code again.
Post Reply